Circutor CEM-C30, Инструкция по эксплуатации

Страница: 28 / 40

4�7�8� Partial energy meter deletion
On this screen you select whether or not to delete the partial
energy meters.
Long press the
button to delete the energy meters. The
validation screen (
Figure 13
) will be displayed next, indicating that
the energy meters were deleted correctly.
After a few seconds viewing the screen shown on
Figure 13
, the system returns to the Partial
energy meter deletion programming main screen.
Short press the button to access the next programming step.
4�7�9� Exiting the setup menu
When this screen is displayed:
Long press the
button to exit the setup menu.
Short press the button to return to the first setup point
(
“4.7.1. Impulse output weight”
)
4.8.- MANUFACTURER INFORMATION SCREEN
Long press the button in the standby mode screen to open these display screens. Short
press the button to display the manufacturer information home screen,
Figure 14
:
Figure 14: Manufacturer information home screen�
Long press the button to open the different screens.
Short press the button to browse the different screens (see
Table 8
).
Long press the button to exit the instantaneous values screens.
The standby mode is activated again when no button is pressed for 60 seconds.
Table 8: Manufacturer information screens�
28
CEM-C30
Instruction Manual