Circutor CEM-C30, Инструкция по эксплуатации

Страница: 27 / 40

To validate the data, move to the last digit and long press the button; the validation screen
will appear (
Figure 13
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown on
Figure 13
, the system returns to the
Energy
cost programming main screen.
Minimum value
: 0.000
Maximum value : 9999.999
Short press the button to access the next programming step.
4�7�7� CO
2
emissions
This is the home screen for entering the ratio of the carbon
emissions.
The carbon emissions ratio is the amount of emissions released
into the atmosphere to produce a unit of electricity (1 kWh).
The European mix ratio is approximately 0.65 kgCo
2
per kWh.
Long press the button to view the value to be programmed.
To write or modify the value, short press the button
repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit with a long press on
the button, allowing the remaining values to be modified.
To validate the data, move to the last digit and long press the button; the validation screen
will appear (
Figure 13
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown on
Figure 13
, the system returns to the
CO
2
emissions programming main screen.
Minimum value : 0.000
Maximum value : 9.000
Short press the button to access the next programming step.
27
Instruction Manual
CEM-C30