Circutor CEM-C20, Инструкция по эксплуатации

Страница: 19 / 38

4.6.- PARTIAL ENERGY DISPLAY
NB:
The partial energy display menu is only displayed if the partial energy display option has
been selected in the setup menu ( see
“ 4.7.6. Display”
)
Long press the key in the standby mode screen to open these display screens. Short press
the key to display the partial energy main screen,
Figure 10
.
Figure 10: Partial energy main screen�
Long press the button to open the different screens.
Short press the button to browse the different screens (see
Table 7
).
The PAR icon on the display indicates that you are viewing the partial energies.
Long press the button to exit the Partial energy screens.
The standby mode is activated again when no button is pressed for 60 seconds.
Table 7:Partial energy screens�
Screen Parameters
Partial imported active energy
Partial exported active energy
Only displayed in the 4-quadrant version.
Partial reactive energy, quadrant 1 (L+)
(1)
Partial reactive energy, quadrant 2 (L-)
(1)
Only displayed in the 4-quadrant version.
19
Instruction Manual
CEM-C20