Circutor AFQm-3WF-030M-480 Скачать руководство пользователя страница 101

Страница: 101 / 116

101

Instruction Manual

AFQm

of the device’s 100A modules.

Note:

When checking the fans in the “

master

” device, the slave device fans will be activated automat-

ically.

10�8�- MAINTENACE OF SURGE PROTECTIVE DECIVES: 70A, 140A, 210A AND 280A CABINET

AFQm

The device has removable surge protective that are accessible from the front. They feature a green

indicator to signal the correct operation of the protective.

Protectores de sobretensión

Surge voltage protection

Figure 103: Surge voltage protection�

These devices are protected by

NH00

fuses.

The purpose of these devices is to protect against transient overvoltage that may appear in the power

supply, mainly due to weather disturbances.

At least once a year, and after adverse weather events (storms, lightning strikes, etc.), the indicator

must be verified to be green.

If it needs replacing, the indicator will change to red. In this case, the condition of the associated pro-

tective fuse must also be checked. The

NH00

fuses include a status indicator that is visible when the

front cover is removed.

If any work has to be done inside the connection area, the device must be discon-

nected from the power supply.

It is important to always replace surge protection and fuses with devices of the same type

Table 49�

Table 49: Description Surge protection and Fuses�

Description

Surge voltage protection

Cirprotec PSC-12,5/400

Fuse

NH00 100A gG/gL 80kA 690V~

The surge protection are of the “plug-in cartridge” type, and can be removed by simply pulling from the

outside, without using any tools. To replace the fuses, the NH fuse puller must be used.

Содержание AFQm-3WF-030M-480





















































































































Результаты поиска

Содержание AFQm-3WF-030M-480

Отзывы:

Похожие инструкции для AFQm-3WF-030M-480

Бренды по названию

Популярные бренды

Circutor AFQm-3WF-030M-480, Инструкция по эксплуатации

Результаты поиска

Содержание AFQm-3WF-030M-480

Отзывы:

Похожие инструкции для AFQm-3WF-030M-480

Бренды по названию

Популярные бренды