CircuPool RJ Classic Series, Руководство по устранению неисправностей

Страница: 12 / 25

CircuPool Help Guides:
RJ Classic Series
12
Water Fault / Add Salt LED Indicators
This Help Guide will troubleshoot possible causes for the “Water Fault” and/or “Add Salt” light to remain continuously illuminated.
IMPORTANT : The "Add Salt" light is only a display indicator and does not cause the system to change its behavior or cease operation
if the salt level is above the minimum level required. If your system does not appear to be affected by any cause listed here, there
may simply be environmental factors affecting the salinity reading and no action is required. If "Water Fault" is illuminated, the
system has ceased generating chlorine.
1. Low Salt Level in the Pool
The salinity level in the pool should be above 3000 ppm at all times. Check your salt level with test strips, or have a pool store
test it for you to determine the current salt level. Always independently test salt levels before adding salt or adding more water.
Adjust your salt content according to your pool size by using the chart below,