Circuitlink BrakeCheck 2 Series, Руководство пользователя

Страница: 29 / 47

© 2001-2016 Circuitlink Pty Ltd
Page 25
To Print using the Infra-Red Link
Plug the power pack into the Infra-Red receiver. Plug
the lead from the receiver into the printer.
If the BrakeCheck has powered-down due to
inactivity:
Press
Menu
until the Current Mode indicates the
test results to be printed: ie, Last Service Brake
Test or Last Hand Brake Test
Press
Enter
once, (this is not necessary if the
unit has not powered-down) the Peak Deceleration
(Front/Rear) LED will be lit and the display will show
a value, eg:
With the BrakeCheck pointing at the Infra-Red
receiver,
Press
Print
once, the BrakeCheck will emit a
long beep sound, keep the unit pointed at the
receiver until a second, short beep is heard. The
display will show:
And the printer will print the results for the last test
performed.