Circuitlink BrakeCheck 2 Series, Руководство пользователя

Страница: 13 / 47

© 2001-2016 Circuitlink Pty Ltd
Page 9
To Test the Service Brake
Press
Menu
until the Current Mode is Service
Brake Test .
Press
Enter
once, the display will indicate whether
or not the unit is level enough to perform the test.
Before an accurate test can be performed the display
must show:
Do NOT tilt the unit to achieve level. Find a more
level vehicle test area and ensure the unit is
parallel with the road.
Note: If you have a Quarry type unit, the display will
show “C 1”, “C 2”, “C 3” or “C 4” before levelling.
These are ground condition codes, press
Menu
to
switch between codes and
Enter
to select the code.
The ground condition codes are:
C1
– “Wet Ground”
C2
– “Dry Ground”
C3
– “Snow/Ice Ground”
C4
– “Tarmac Ground”
The selected code does not change the operation of
the BrakeCheck, it is just stored and printed later.
Press
Enter
again after levelling, the unit is now
ready to perform the test and the display will show: