Circor IMO E12L Series, Руководство по обслуживанию изделия

Страница: 3 / 17

READ THIS ENTIRE PAGE BEFORE PROCEEDING
FOR SAFETY OF PERSONNEL AND TO PREVENT DAMAGE TO EQUIPMENT, THE FOLLOWING
NOMENCLATURE HAS BEEN USED IN THIS MANUAL:
DANGER
Failure to observe precautions noted in this box can result in severe bodily injury or loss of life.
WARNING
Failure to observe precautions noted in this box can cause injury to personnel by accidental contact with
equipment or liquids. Protection should be provided by user to prevent accidental contact.
CAUTION ATTENTION
Failure to observe precautions noted in this box can cause damage or failure of equipment.
Noncompliance of safety
instructions identified by the
following symbol could affect
safety for persons: Safety instructions where
electrical safety is involved
are identified by: Safety instructions which shall be
considered for reasons of safe operation
of pump and/or protection of pump itself
are marked by the sign:
ATTENTION
ATTENTION
If operation of pump is critical to your business, we strongly recommend you keep a spare pump or major
repair kit in stock at all times. As a minimum, a minor repair kit (o-rings, gaskets, shaft seal and bearings)
should be kept in stock so pump refurbishment after internal inspection can be accomplished.
CONTENTS
SAFETY AND TABLE OF CONTENT……………..….............................................. A
A. GENERAL
NSTRUCTIONS.......................................................................... 1
B. INTRODUCTION ......................................................................................... 1
C. DESCRIPTION OF THE PUMP ................................................................... 1
D. PUMP MODEL IDENTIFICATION ............................................................... 2
E. ORDERING INSTRUCTIONS ..................................................................... 2
F. OPERATION ................................................................................................ 3
G. PARTS LIST AND TORQUE TABLES .......................................................... 4
H. PUMP MAINTENANCE ............................................................................... 5-9
I. TROUBLESHOOTING ................................................................................. 10
J. FIELD AND FACTORY SERVICE AND PARTS ........................................... 10
A