Circor IMO E12L Series, Руководство по обслуживанию изделия

Страница: 5 / 17

D. PUMP MOEL IDENTIFICATION
This instruction manual covers the Imo Series E12L pumps with rotor sizes 118 through 200.
The model of each pump is identified on the pump nameplate. Refer to Figure 1 and Table 1 for
instructional keys when using this manual.
Table 1 – E12L Series Pump Models
Pump Model Number Assembly Figure Number
E12LYTFS-118
E12LYTFS-137
E12LYTFS-156
E12LYTFS-187
E12LYTFS-200
3
4
5
5
5
Figure 1 – Model Designator Definitions
E 12L X X X X XXX
Design Modification
(Assigned by Imo)
Series
Seal Design
Rotor Size
-118, -137, -156,
-187, -200
Y = Type BXQW Case
S = Steel
Seal Seat Material Mounting
T = Carbide Seal Seat F = Foot Mounted
E. ORDERING INSTRUCTIONS
When corresponding with Imo Pump regarding Series E12L pumps, refer to the pump nameplate, this
instruction manual, and the assembly drawing as instructed below:
1. From pump nameplate, record the pump model number, serial number and manufactured date.
2. Record instruction manual number, revision and date.
3. From the instruction manual, record the figure numbers that apply to the replacement part(s).
4. From the assembly drawing or parts list (see Figures 3, 4, 5 and Table 3) provide the IDP number(s)
and names for the replacement par t(s).
5. Give the above information to your Imo service representative.\
Imo sales and service representatives are listed herein and in Imo General Installation Operation,
Maintenance, and Troubleshooting Manual, SRM00046 .
2