background image

READ THIS ENTIRE PAGE BEFORE PROCEEDING 

 
FOR THE SAFETY OF PERSONNEL AND TO PREVENT DAMAGE TO THE EQUIPMENT, THE 
FOLLOWING NOMENCLATURE HAS BEEN USED IN THIS MANUAL: 
 

 

DANGER

 

 

Failure to observe the precautions noted in this box can result in severe bodily 
injury or loss of life. 

 

 

WARNING

 

 

Failure to observe the precautions noted in this box can cause injury to personnel 
by accidental contact with the equipment or liquids.  Protection should be provided 
by the user to prevent accidental contact. 

 

 

CAUTION

 

 

ATTENTION

 

 

Failure to observe the precautions noted in this box can cause damage or failure 
of the equipment. 

 

Non compliance of safety 
instructions identified by 
the following symbol 
could affect safety for 
persons: 

Safety instructions where 
electrical safety is 
involved are identified by: 

Safety instructions which 
shall be considered for 
reasons of safe operation 
of the pump and/or 
protection of the pump 
itself are marked by the 
sign: 

 

 

ATTENTION 

 

CONTENTS 

 

Safety and Table of Contents .......................................................................................................A 
General  Instructions..................................................................................................................... 1 
Model Designation ........................................................................................................................ 1 
Ordering Instructions..................................................................................................................... 1 
Installation..................................................................................................................................... 2 
Operation ...................................................................................................................................... 3 
Inspection and Parts List............................................................................................................... 3 
Maintenance - Disassembly Instructions....................................................................................... 4 
Maintenance - Reassembly Instructions ....................................................................................... 4 
Pump Assembly Drawing.............................................................................................................. 5 
 
 
 
 

 

ATTENTION

 

 

If operation of this pump is critical to your business, we strongly 
recommend you keep a spare pump or major repair kit in stock at all times.  
As a minimum, a minor repair kit (o-rings, gaskets, shaft seal and bearings) 
should be kept in stock so pump refurbishment after internal inspection can 
be accomplished. 

 

Содержание IMO 110









Отзывы: