Circontrol Master-Slave, Инструкция по эксплуатации, Страница: 84 / 92

82
Master/Slave Instruction Manual
Value Description
Metervalue sample
interval Number of seconds between MeterValue during an ongoing
Charge Transaction.
*NOTE :
setting this value to 0 disables the MeterValue.
Transaction
message retry
interval Number of seconds between transaction message attempts.
*NOTE :
setting this value to 0 disables the attempts.
Charging cable
connection timeout Number of seconds the Charge Point must wait for the user to
plug/unplug the cable.
*NOTE:
this field is for information purposes, it cannot be
modified.
Local authList
enabled
Yes:
Local Authorization List enabled
No :
Local Authorization List disabled
Local auth list
max. length Maximum size of the
Local Authorization List, a list of identifiers
that can be synchronized with the Central System.
It can be viewed accessing to the following URL:
http://<IP>:8080/services/cmd/dump_localList.xml
*NOTE:
this field is for information purposes, it cannot be modified.
Send local list
max. length Maximum number of identifications that can be send in a single
request from the Central System.
*NOTE:
this field is for information purposes, it cannot be modified.
Reserve connector
zero supported
Yes:
Charge Point supports reservations on connector 0. That
reservervation is not done on a specific connector, one connector
remains available for the reserved idTag.
No :
Charge Point does NOT support reservations on connector 0.