CIRCLE FITNESS M8, Руководство пользователя

Страница: 48 / 80

M8 – Owner’s Manual
Page
47
Item Error Message Descriptions
7.
CALORIES TIME
E09 0H
Heat sink of inverter is detected over 85
℃
, cool it down and
restart.
Analysis and Solution:
Running belt/deck is worn
: It will cause the motor current (input
current) to be too high, it’s probably in a long term of Moderate
wear or Need exchange status so that it causes the temperature to
become too high, should you replace running belt/deck and
properly add lubricating system), check the input current status;
Motor current (output current) should be at the value as below,
user weight is lower than 100 kilogram and under 8km/h:
New Machine Slight wear Moderate wear Need exchange
Output current 5
↓
6
↓
7.5
↓
7.5
↑
8.
CALORIES TIME
E10 0L
The motor current is operating higher than rated 110% in a certain
time, which means the loading is too high, should replace the
running belt/deck.
Analysis and Solution:
Running belt/deck is worn
: It will cause the motor current (input
current) to become too high, it’s probably in a long term of Need
exchange status so that cause the current is too high, should
replace running belt/deck and properly add lubrication (non-self
lubricating system), check the input current status; Motor current
(output current) should be the value as below, user weight is lower
than 100 kilogram and under 8km/h:
New Machine Slight wear Moderate wear
Need
exchange
Output current 5
↓
6
↓
7.5
↓
7.5
↑
9.
CALORIES TIME
E11 0L1
Motor current is exceed the rated 150%, the loading is too high,
should replace the running belt/deck.
Running belt/deck is worn
: It will cause the motor current (input
current) to become too high, it’s probably in a long term of Need
exchange status so that because the current is too high, should
replace running belt/deck and properly add lubrication (non-self
lubricating system), check the input current status; Motor current
(output current) should be the value as below, user weight is lower
than 100 kilogram and under 8km/h:
New Machine Slight wear Moderate wear Need exchange
Output current 5
↓
6
↓
7.5
↓
7.5
↑
10.
CALORIES TIME
E02 ntcF
Temperature sensor is abnormal, replace the inverter.
11.
CALORIES TIME
E13 LF
Motor cable is not connected, check the connection.
12.
CALORIES TIME
E14 dbuP
The brake system of inverter is damaged, replace the inverter.