BGS2-E/BGS2-W Hardware Interface Overview
7.2 Compliance with FCC and IC Rules and Regulations
29
BGS2_HIO_v01.300
Page 29 of 29
2011-03-08
Confidential / Released
7.2
Compliance with FCC and IC Rules and Regulations
The Equipment Authorization Certification for the Cinterion Wireless Modules reference appli-
cation described in
Section 7.1
will be registered under the following identifiers
1
:
FCC Identifier: QIPBGS2
Industry Canada Certification Number: 7830A-BGS2
Granted to Cinterion Wireless Modules GmbH
Manufacturers of mobile or fixed devices incorporating BGS2-W modules are authorized to use
the FCC Grants and Industry Canada Certificates of the BGS2-W modules for their own final
products according to the conditions referenced in these documents. In this case, an FCC/ IC
label of the module shall be visible from the outside, or the host device shall bear a second label
stating "Contains FCC ID QIPBGS2", and accordingly “Contains IC 7830A-BGS2“.
IMPORTANT:
Manufacturers of portable applications incorporating BGS2-W modules are required to have
their final product certified and apply for their own FCC Grant and Industry Canada Certificate
related to the specific portable mobile. This is mandatory to meet the SAR requirements for por-
table mobiles (see
Section 1.3.2
for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
1. Applies only for the quad band module variant BGS2-W.
