FuzzySca
n
Pr
o
g
ram
mi
ng Ma
n
ua
l
Configuring Your Scanner
8
Programming Procedures
As you scan the barcode command to select the desired
parameters,
information
about
the
final
selected
parameters represented by the barcode commands are
stored in the FuzzyScan’s internal Flash Memory ASIC or
memory. If you turn off the unit, the Flash Memory ASIC or
non-volatile memory retains all programming options. You
need not re-program the FuzzyScan if you want to keep the
existing configurations in the next power on.
The programming procedures of FuzzyScan are designed
as simple as possible for ease of setting. Most
programming families take the
Single Scan Selection
programming procedure. But several programming families
have more complex and flexible programmable options,
and you must take
Multiple Scans Selection, Cycling
Scan Selection or Dual Level Selection
to complete their
programming procedures. Each kind of programming
procedure is listed in the following pages for your reference.
Please give careful attention to become familiar with each
programming procedure.
If the programming family must take multiple scans
selection, cycling scan selection, or dual level selection
procedures, the family of the programming menu will be
marked with the matched representing symbol of
Programming Category
(P.C.) in bold font listed in the
following table. You can easily find the bold mark in the
programming menu, and refer to their flowcharts for details.
Before setting the FuzzyScan, please also refer to the
“Beeping Indications” listed in Appendix to understand the
details of programming beeping indications. It will be very
helpful for you to know the existing status while you are
programming the FuzzyScan.
Conventions of Programming Menu
Conventions
Descriptions
◄
Factory Default Value
P.C.
Programming Category
SS
: Single Scan selection
MS
: Multiple Scans selection
CS
: Cycling Scan selection
DS
: Dual level Scan selection
( )
Necessary Option Code
[ ]
Selectable Option Code
Содержание Fuzzyscan
