Cino Fuzzyscan, Руководство по программированию

Страница: 62 / 97

FuzzySca
n
Pr
o
g
ram
mi
ng Ma
n
ua
l
Configuring Your Scanner
61
PROGRAM
Operation Control
Aiming Control, Delay Aiming Time-out Control,
Decode Aiming Control
F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Aiming Control
SS
SS
SS
Regular Aiming
Intelligent Aiming◄
Delay Aiming Control
0
1
2
Delay Aiming Time-out Control
SS
SS
SS
SS
SS
SS
SS
SS
200 ms
400 ms◄
800 ms
1 sec
1.5 sec.
2 sec.
3 sec.
4 sec.
0
1
2
3
4
5
6
7
Decode Aiming Control
SS
SS
SS
SS
Disable in Hand-Held mode
Enable in Hand-Held mode◄
Disable in Hand-Free mode◄
Enable in Hand-Free mode
0
1
2
3

The Aiming Control is available for trigger mode and multiple read mode.

Under Regular Aiming , the aiming light is turned on only when the trigger button is pressed.

Under Intelligent Aiming , the aiming light is turned on when the scanner is lifted or senses incoming object. A trigger button press activates decoding process. After 2
seconds of inactivity, the aiming light will be shut off.

Delay Aiming Control allows a delay time for the operator to aim the scanner before the image is taken. During the delay time, the aiming light will be on, but the light
source won’t be turned on and the scan session won’t start until the delay time is up. The time delay before the start of the scan session can be adjusted by setting Delay
Aiming Time-out Control .

The Delay Aiming Time-out Control is only effective under trigger mode and multiple read mode.