13
Useful Features
Remote Control
A complete serial command set has been implemented into the Wi-Fi scanner.
You can use the Remote Control commands to control Wi-Fi scanner(s) from
the remote host. The most useful remote commands are listed below for your
reference.
Remote Message
This command allows you to send message
together with beeping and vibration.
Remote Indication
This command allows you to page the scanner, or
send beeping and vibration from the remote host.
Remote Lock & Unlock
You can use this command to lock or unlock the
scanner remotely. Once you locked the scanner,
the scanner can’t work till you send unlock
command.
How to use remote control
If you used Cino WaveCentre together with your
Wi-Fi scanner, you can easily use all remote
control functions without writing a program. If you
want to use the remote control in your application,
please contact your supplier to obtain a detailed
documentation and SDK for development.
Administrator and User Password
Once you enabled the Administrator Password, the scanner will ask you to
enter the administrator password before you can enter “
SETUP”
to configure
the scanner. If you enable the User Password, it will help to prevent any
unauthorized use of the scanner. Moreover, you can limit the available
functions for all users.
When the scanner enters into sleep mode, you have to enter administrator
password or user password right after the scanner wakes up. Please note
there is
NO
master password available. You are recommended to keep your
preset passwords in a safe condition for future use.
