Parts Needed:
Arca-style plate
Motor
Ballhead
Controller
Tripod
There are two preferred setup options:
Option 1. Attachment for Tripod
Step 1. Attach Axis360 Motor to tripod (Figure 19 & 20)
Step 2. Place ballhead on Axis360 Motor and attach the clamp to it (Figure 21)
Step 3. Attach arca style plate to camera and slide into clamp
TIP: Make sure clamp is securely tightened
Step 4. Connect cable to controller Camera Port (Figure 14)
Step 5. Snap the controller onto the motor using the quick connect pieces (Figure 15, 16 & 21)
2 | Setup up Pan
For heavier cameras we recommend a sturdy ballhead. You can attach a clamp directly onto the
motor (instead of the ballhead).
Figure 19.
Figure 20.
Figure 21.
8.
See it in video here:
https://vimeo.com/101748664
