Attach Ballhead to Cart
Step 16. Attach ballhead, you can use the one we provide or your own (Figure 12)
Step 17. Under cart use the silver screw to secure ballhead to cart, tighten with Hex Key (Figure 13)
Step 18. Screw Clamp onto ballhead and arca-style plate into your camera
Connect Motor to Controller
Step 19. Plug motor cable into Motor Port (Figure 14)
Step 20. Snap motor onto the Male Quick Connect piece next to the motor (Figure 15)
TIP: Snap the Quick Connect pieces together by first positioning them together at an angle then
pushing downward and forward like popping on a bottle cap (Figure 16)
Step 21. Place camera on ballhead
Step 22. Connect camera cable to camera
Figure 12.
1 | Setup up Slide cont.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
6.
