Option 2. Attachment for Slider
This set up is preferred for mounting on the slider for a SLIDE AND PAN though it also works on a tripod.
Step 1. Separate ballhead from Male Quick Connect (Figure 22 & 23) and set aside
TIP: Make sure the ballhead grip is un-tightened. It’s easier to un-snap the piece when the ballhead is
connected to something such as a tripod
Step 2. Screw Threaded Male Quick Connect into Motor and snap ballhead onto that connector (Figure 24)
2 | Setup up Pan cont.
Connector
Piece
Figure 22.
Figure 23.
Cinetics Quick Connect Pieces
Threaded Male Quick Connect
Male Quick Connect
Female Quick Connect
Figure 24.
9.
See it in video here:
https://vimeo.com/97264416
