■
Disconnect the enclosure from a PC
Before disconnecting the USB 4X HDD enclosure from the PC please follow the following steps to
remove the USB cable.
1. Click on the “Unplug or eject hardware” indicator on
the task bar in computer screen display.
2. Click on the command bar “Stop USB Mass Storage
-Drive(F:)” to disable the device you wish to remove.
Please! Check the drive letter to be disconnected if
there are multiple devices connected
3. When the screen prompt appears, read the
instructions carefully.
If the system indicates that you not to remove the
device, DO NOT remove the device. You should exit the
present program which accesses your USB 4X HDD
device and return to Step 1.
For Mac PC is you must drag the “USB 4X HDD” icon to
the “Trash” to eject the device.
Otherwise, a “Device Removal” warming message icon
will pop up to warm you that the data might have been lost
or damaged.
