3-2 Parts description
1)
USB/ eSATA LED:
ESATA LED : Connect with eSATA interface
USB LED : Connect with USB3.0 interface
2)
Access LED:
SATA 4~SATA1,
LED ON : The HDD has been installed in the device
LED Blinking: HDD error or damage
LED OFF : There are no any HDD in the device
3)
Status LED:
Used to indicate the situation of the device. (Two Color LED)
1. GREEN - HDD OK
2. RED - HDD FAILS
3. GREEN / RED - REBUILD.
4)
Power switch:
ON/OFF switch ON or OFF device power.
5)
Power connector:
Connect to an AC power outlet with the attached power supply cable.
6)
USB 3.0 connector:
Connected to an USB 3.0 port of a PC with an attached USB3.0 cable
7)
DIP switch:
The mode setting switch. For the details please refer to the Chapter 4-2.
8)
eSATA connector:
connected to an eSATA port of a PC with an attached SATA cable.
9)
Reset:
press and hold reset button, turn on box, keep hold reset button for 15sec, tune off box,
release reset button to reset the RAID before the change of the RAID mode.
