4-2 The setting of DIP mode switch
First, please relocate the DIP switch at rear side of the case.
A, To reset all RAID modes, please set every Dip/SW at OFF position then hold reset button and
turn ON the power of enclosure, pthen shut down the device and release reset button to complete
the mode reset.
B. To set the DIP switch to a new RAID mode, please follow the mode chart as below, press the
RESET button and hold it, turn on the box and keep hold reset button for 15sec.
DIP switch code(from left to right) “DIP switch 1”, “DIP switch 2” and “DIP switch 3” “DIP switch 4”.
Reset:
please press and hold for 15 seconds RESET button when change any RAID mode.
ITEM S/W
1 S/W2 S/W3 S/W4 MODE
1
OFF ON ON ON
RAID0
2
OFF
ON ON OFF
RAID1/RAID10
3
OFF
ON OFF OFF
RAID3
4
OFF
OFF ON OFF
RAID5
5
OFF
OFF ON ON
CLONE
6
OFF
ON OFF ON
LARGE
7
OFF
OFF OFF OFF
NORMAL
