8
Lower right knob:
CCT Adjustment
The color temperature (CCT) of the fixture is controlled by turning the lower right knob in a continuously
variable range of 2700K to 6500K. Pushing the lower right knob cycles the CCT of the fixture between
popular settings: 2700, 3200, 4300, 5600 and 6500K.
Upper left knob:
Color Saturation
The SATURATION of color added to the base white light is controlled by the upper left knob, which has
presets at 0%, 10%, 20%, 50%, 80% and 100%. Note that the addition of saturated color does not change
the base CCT of the white light; these are completely independent functions.
Upper right knob:
Hue Control
The upper right knob adjusts the saturated color hue, in 256 increments, and the approximate hue is
displayed on the color ribbon. Pushing this knob cycles between the primary and secondary colors: Red,
Yellow, Green, Cyan, Blue and Magenta. Colors can be fine-tuned anywhere within the color space.
The Status display shows all values selected for these four controls at all times.
DMX Mode
When DMX is selected from the root menu, operation of
the fixture is controlled remotely on four DMX addresses
in the address range of 001 to 512. Also, various bit rate
and DMX Personality parameters can be selected for the
remote operation of the unit. To continue to change the
DMX parameters, select DMX SETTINGS and push the knob;
otherwise select KEEP SETTINGS to return to the previous
menu.
If DMX SETTINGS is selected, the menu shows different
DMX personalities that the fixture can operate with: 8-bit
HSI, 16-bit HSI, 8-bit RGB and 16-bit RGB. The following
further explains:
