Cinegears MULTI AXIS FOLLOW FOCUS, Руководство пользователя

Страница: 25 / 26

Instruction
© 2014 CINEGEARS All Rights Reserved
Manual Calibration
Specifically used with infinity lenses that have no start or end point. Now you need to do the calibration
for focus, zoom and iris separately. First, Press the O and their corresponding buttons on the remote
controller together for 3 seconds, (B for focus, C for zoom and D for Aperture). Then you will see A, B, C,
D four lights are turned on. Then use (C) button or (D) button to control the lens. (Hold down the C or D
key for more than 3 seconds it will automatically rotate continuously.) Once it rotates to the proper
position, click the (A) button to set a starting point, (B) button to set the end point. At last, (A, B, C, and
D) four buttons lights turn off to indicate the initialization has been completed.
Semi-­automatic Calibration
You need to initial the focus manually, then initial the other two by a mixed mode.
After the initialization of lens, the swivel will automatically shorten the distance for a slight amount to avoid
the noise of crashing.
The backlight flashes during the setting. The products are able to store the data in the course of sudden
power lost and replacement of battery, you can still have the original data memorized and continue the
operation once turn the power on. If the drive or Lens has been dismantled or replaced, or the
corresponding position of gears has been changed, you need to repeat the initialization. (The data will
still be valid when automatic initialization was chosen or having the same type of lens.)
Buttons and Lights
※ SET ＋ O (click for 3 sec) parameter
※ SET ＋ A (click for 3 sec) ALL (focus, zoom and aperture) automatic initialization
※ SET ＋ B (click for 3 sec) automatic initialization of focus
※ SET ＋ C (click for 3 sec) automatic initialization of zoom
※ SET ＋ D (click for 3 sec) automatic initialization of aperture
※ REC ＋ B (click for 3 sec) manual initialization of focus
※ REC ＋ C (click for 3 sec) manual initialization of zoom
※ REC ＋ D (click for 3 sec) manual initialization of aperture
※ During the manual initialization process, make sure A, B, C and D lights are on, use ( C ) or ( D )
button to rotate the gear to the position you want then use (A) and (B)