Cinegears MULTI AXIS FOLLOW FOCUS, Руководство пользователя

Страница: 11 / 26

Instruction
© 2014 CINEGEARS All Rights Reserved
Material
The Follow Focus system is made from an aluminum alloy using the precision of CNC machining. The
design also allows the drive gear to be installed on both sides of the lens, which makes it easier to have
multiple drives. The product uses the latest technology from Japan with an accurate, and precise, DC
servo motor and the latest 32-­bit high-­speed control chips. These electronic and mechanical parts
combine, perfectly, together to achieve excellent performance, smooth control, and precise positioning.
Input
The CINEGEARS Wireless Follow Focus has an input voltage range of +12V to 30V, there is also an
automatic voltage regulator circuit inside the controller. The controller also comes with a single channel
wireless remote REC trigger.
The controller contains a lithium polymer battery that can work continuously for more than 20 hours on
a full charge. Recharge the controller using a mini USB cord.
Controller
The controls have been designed for ease of use: They allow for preset memory
points, where you can save up to four. The controller allows for, up to, three types of
automatic synchronization (focus, zoom, aperture). The controller has an adjustable
speed which controls the transition speed of the presets.
The controller has an accuracy circuit built into it to ensure the lens stop precisely
where you want it to, even after repeated use. Physical error is less than ±0.5 mm
and it is mainly caused by the gap between the teeth of the gear.
Direction Control
There is a button (also the indicate light, red part in the picture) on the rear of the
drive to change the spin direction of the gear.