CIMLINE MAGMA 110, Руководство владельца/оператора

Страница: 31 / 78

- 31 -
Burner Nozzle Replacement
During operation, oil is forced through the
burner nozzle at 140 PSI to permit the fuel to
be atomized for easy ignition. The nozzle
orifice has normal wear due to this high
pressure. Due to the high wear, it is recom-
mended that the nozzle be replaced at least
once per operating season. To replace the
nozzle, remove the burner from chamber.
Remove the two screws which secure the
burner head (A) to the air tube (B). Carefully
insert a 5/8" deep well socket over the
nozzle (C) and turn it counterclockwise to
remove. Be very careful not to bend the
electrodes (D) while performing this task.
When installing the new nozzle,
do not touch
the filter portion (E) of the nozzle. The filter is
so fine that oil from your skin can clog the
filter.
B
A
C
E
D
After each 200 hours of operation, the chamber lining should be inspected. Remove (8)
burner mount securing bolts (A) and pull out burner and mount. Inspect lining (B) for excessive
cracking. Also check the condition of retainer (C). Lining cracks are acceptable as long as
they are not large enough to allow flame to contact the combustion chamber walls.
B
C
A
Chamber Lining Inspection