background image

3

OXE DIESEL SINGLE CONTROL HEAD MANUAL

CONTENT

CONTENTS

Overview _______________________________________________________________________________ 4

About this manual ______________________________________________________________________ 4

Safety information _______________________________________________________________________ 5

Notice to the operator ____________________________________________________________________ 5

Safety regulations _______________________________________________________________________ 6

Prior to every use _______________________________________________________________________ 6
During use _____________________________________________________________________________ 7
After use ______________________________________________________________________________ 7
Maintenance ___________________________________________________________________________ 7

Safety labels ____________________________________________________________________________ 8

Components labels ______________________________________________________________________ 8
Other labels ____________________________________________________________________________ 8

Description _____________________________________________________________________________ 9

General _______________________________________________________________________________ 9
NMEA 2000® Network ___________________________________________________________________ 9
Control Head ___________________________________________________________________________ 9
Control head overview __________________________________________________________________ 10

Operation _____________________________________________________________________________ 11

Before each use ________________________________________________________________________ 11

First time use _________________________________________________________________________ 11

Single lever control head ________________________________________________________________ 12

Control head operation __________________________________________________________________ 13

Neutral throttle warmup ________________________________________________________________ 15
Low speed control _____________________________________________________________________ 16
Trolling mode _________________________________________________________________________ 16
Lever adjustment  ______________________________________________________________________ 17
Station selection and station select protection _______________________________________________ 18

Faults and hazards ______________________________________________________________________ 19

Maintenance ___________________________________________________________________________ 20

User’s responsibility ____________________________________________________________________ 20
Qualified OXE Diesel Mechanic ____________________________________________________________ 20

Mounting template ______________________________________________________________________ 21

Содержание OXE Series

























Отзывы: