ciil UltraView CL-2667, Руководство пользователя

Страница: 9 / 56

FCC CAUTION
To assure continued compliance and possible undesirable interference, ferrite cores may be used
when connecting this LED display to video equipment; and maintain at least 400mm spacing to other
peripheral device.
CANADIAN NOTICE
This Class B digital apparatus complies with Canadian ICES-003
CAUTION:
Please use the power cord provided with this display in accordance with the table below If a
power cord is not supplied with this equipment, please contact your supplier
Only plug equipment into receptacles with GFI.
Important: Ciil Technologies is not responsible for any issues created by water present at the
plug/receptacle insertion point.
This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
U.S. Responsible Party: Ciil Technologies LLC,
Address: 2300 White Oak Cir, Aurora, IL 60502
Tel. No.: 630-898-1700
Type of Product: Digital Display
Equipment Classification: Class B Peripheral
Model: CL-2667, CL-2667-W
We hereby declare that the equipment specified above conforms to the technical standards as
specified in the FCC Rules.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to
CAN/CSA C222 No 60065-03
English-5 English-4
English
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE� ALSO, DO NOT USE THIS UNIT’S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR
OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED�
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH
VOLTAGE COMPONENTS INSIDE�
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL�
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE
POWER CORD IS UNPLUGGED FROM WALL SOCKET�
TO FULLY DISENGAGE THE POWER TO THE UNIT,
PLEASE DISCONNECT THE POWER CORD FROM THE AC
OUTLET� DO NOT REMOVE COVER (OR BACK)� NO USER
SERVICEABLE PARTS INSIDE� REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL�
This symbol warns user that uninsulated voltage within the
unit may have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any
part inside this unit�
This symbol alerts the user that important literature concerning
the operation and maintenance of this unit has been included�
Therefore, it should be read carefully in order to avoid any
problems�
CAUTION: Please use the power cord provided with this display in
accordance with the table below� If a power cord is not supplied with this
equipment, please contact your supplier�
Plug Type Plug Shape Region Voltage
North America U�S�A�/Canada AC 120 V
Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus�
The Class I apparatus shall be connected to a mains socket outlet with a
protective grounding connection�
SAFETY INSTRUCTIONS CONTINUED DECLARATION OF CONFORMITY
SAFETY INSTRUCTIONS
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used in accordance with these instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
age to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/display technician for help.
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
8
9