ciil UltraView CL-2667, Руководство пользователя

Страница: 5 / 56

READ BEFORE OPERATING EQUIPMENT
Thank you for purchasing our product. Before using it, please read this user manual carefully and follow
the instructions correctly for safe operation. Please keep this manual handy for future reference. Also,
please be sure to always include this user manual in the packaging when transferring or transporting this
product to a different location.
The lamps in this product contain mercury. Please dispose according to state, local or federal law.
Batteries Installed Warning
Caution
- Danger of explosion if batteries are incorrectly re-placed. Replace only with the same
or equivalent type. The batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not defeat the safety purpose of the polarized or grounding- type plug A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
6. Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the apparatus.
7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, does not operate normally, or
has been dropped.
8. Only use attachments/accessories specified by the manufacturer.
9. In case of emergency such as fire or electric shock caused by the product, immediately contact 911
or proper emergency police / fire service agencies in your country.
10. If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.
11. Follow instructions for wall, or ceiling mounting as recommended by the manufacturer.
12. An outdoor antenna should not be located near overhead power lines or any electrical circuits.
13. If an outside antenna is connected to the receiver, confirm that the antenna system is grounded to
protect against voltage surges and built up static charges Section 810 of the National Electric Code,
ANSI/NFPA No 70-1984, provides information with respect to proper grounding for the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
connectors, location of antenna discharge unit, connection to grounding electrodes and requirements
for the grounding electrode.
14. Use properly rated power voltage. Use of non-rated voltage may cause fire, electric shock and severe
damages to the product.
15. Under no circumstances, do NOT open the cabinet. High voltage inside of this
product may cause electric shock.
16. Under no circumstances, do NOT modify or disassemble this product as it may cause fire, electric
shock, or severe damages to the product. Also any unauthorized modifications made to the product
automatically void product warranty.
17. Never touch antenna lines or wires, if applicable or power cables or power plugs in such circumstances
as lightning and thunder as it may cause electric shock.
18. Any severe physical impact on the product may cause certain components to fall out of place within or
to break, which may cause fire or electric shock. In such event, do not operate the product. Contact
the manufacturer for support.
19. Clean dust off the power plug, periodically, to keep it clean and dry, ensuring proper and safe operation
of the product.
20. Do NOT destroy, process, or place the product close to any heating device; do NOT bend or twist
power cords, power plugs, cables, or wires with excessive force; do NOT place any heavy object on
the product as all of the above may cause damages to the product and result in fire or electric shock.
21. Do NOT touch power plugs with wet hands.
22. Always make sure to plug in the power plug firmly and completely. Incompletely placed power plugs
may cause fire or electric shock due to built up heat emission.
23. Do NOT use any non-rated power sockets or power strips with many other devices jointly plugged in.
The wire of non-designated capacity may cause fire due to built up heat emission. Try to use a single,
directly dedicated and rated GFI power socket for the product for safe operation.
24. In case of product malfunction or unusual events such as electrical burning smell, smoke, or loss of
content signals on TV/Display due to internal overheating, immediately turn off and unplug the power
and contact the manufacturer.
GENERAL SAFETY PRECAUTIONS
4
5