ONT G-25E Hardware Installation Manual
3.
Installation
3.1
Site Preparation
3.1.1
Environmental Requirements
The ONT will operate in temperatures ranging from 0° C to 40° C, relatively humidity ranging
from 0° C to 85° C.
3.1.2
Power Requirements
The ONT will be shipped with a universal power adaptor. However, before installation, check if
the AC power input matches the specification printed on the power adaptor (input voltage,
current, etc.)
CAUTION: Please use the power adaptor within the package only, or the replacement unit
that provided by CIG. Other power adaptor may cause damage to the ONT and other
disasters.
3.2
Connecting to Network
1.
Remove the Laser Lock Door (Figure 2).
Figure 2 Remove the Laser Lock Door
2.
Remove the dust covers from the SC/APC optical connectors. Clean the connector if
necessary.
3.
Plug in the fiber connector to connect the ONT to the network (Figure 3).
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
6
