CIFARELLI M1200US, Инструкция по эксплуатации и техническому обслуживанию

Страница: 18 / 36

Cifarelli S.p.A - Italy
Page 18
M
IST BLOWER CONTROLS
H
H
a
a
n
n
d
d
l
l
e
e
Observe the pictures here below to understand how to use the controls of the
handle (Picture 1 pos.11) on the throwing pipe:
Observing the Picture 10:

To start the engine, the switch pos.2 has to
be positioned on “
1
”.

To accelerate, press the lever pos.1
together with the accelerator security lever
pos.3 .

If you want to work with steady RPM, press
the security lever
pos.3 and together move
the steady throttle lever pos.4 toward the
mark “
+
” to increase the RPM of the engine.
To decrease the RPM of the engine, move
the steady throttle lever toward the mark “
-
“
.

To turn off the engine, move the switch
pos.2
to “
0
”.
Observing the Picture 11:
The switch in
pos.5 activate or block the
automatic opening of the liquid tap included
in the handle.

When the switch is in low position, the
opening of the tap is automatic while
accelerating. With the throttle at the idle, the
tap remains closed.

When the switch is in high position, the tap is
always open whatever it is the position of the
throttle. To slide the switch
pos.5 upward, it
is necessary to press simultaneously the
throttle lever (Picture 10 pos.1).
Picture 10 - Controls on the handle
1 Throttle lever
2
Power switch
3 Accelerator security lever
4
Steady throttle lever
5
Switch for blocking the tap in the position
of MAXIMUM opening
Picture 11 - Switch for the
automatic liquid tap
1
3
5
2
4