manualshive.com logo in svg

CID Severe Duty 20-30 GPM Series, Руководство пользователя

Поделиться
Скачать
CID Severe Duty 20-30 GPM Series Скачать руководство пользователя страница 9

SAFETY ALERT SYMBOL

 - This symbol is used to alert 

you to potential personal injury hazards. Obey all safety 

messages that follow this symbol to avoid possible in-

jury or death.

 2.2    Safety Symbols

Indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

This signal word is limited to the most extreme

situations.

Hazard Classifications

Hazards are identified by the “Safety Alert Symbol” and followed by the signal word 

“DANGER”, “WARNING”, or “CAUTION”.

Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate

injury.

Indicates a situation which may cause damage to equipment or 

property. Messages are not related to personal injury.

Indicates specific safety-related instructions or procedures.

8

This manual and decals on this machine use safety symbols, pictograms and 
color coded signal words to alert you to potential hazards that may cause 
death or severe injury if a safety instruction is ignored. 

Содержание Severe Duty 20-30 GPM Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды