manualshive.com logo in svg

CID Severe Duty 20-30 GPM Series, Руководство пользователя, Страница: 31 / 52

Поделиться
Скачать
CID Severe Duty 20-30 GPM Series Скачать руководство пользователя страница 31

Severe Duty Bent Axis Piston Brush Cutter

March 2021

30

•  When sharpening the blades, be careful not to overheat 

the blade steel causing the blade material to become 
brittle and prone to early failure. 

•  Grind each blade to the similar shape and size so as to 

not create a set of mismatched blades. 

•  ALWAYS sharpen or replace cutter blades as set. 
•  NEVER mix and match used blades with new blades as 

they will cause the brush cutter to be unbalanced and 
result in a vibration that may cause damage to other 
brush cutter parts.

•  Install blades in the same orientation they were in 

when removed.

•  Opposing blades must be installed in the same 

orienation.

•  Flip all blades at the same time if you wish to use the 

blades opposing edges.

Blade Sharpening and Replacement Notes

4.7   Blade Installation 

Blades must be installed as a set to ensure proper balance of the blade 
holder. Improper balance will cause vibrations that could result in 
component failure.

Содержание Severe Duty 20-30 GPM Series





















































Отзывы:

Нет отзывов