CI-340 Operation Manual
CID Bio-Science
1554 NE 3
rd
Ave
Camas, WA 98607, USA
Phone: +1 (360) 833-8835
Fax: +1 (360) 833-1914
[email protected]
www.cid-inc.com
9
Files are stored in chronological order, with the names and data affiliated accordingly. Up to 1200 files
or 4 MB of data are allowed for storage. Be sure to transfer important data before deleting it from the
CI-340. Refer to the
DATA TRANSFER
section for related information.
Press the
+
key (for the letter “D”) to delete the last file saved, or
+
key (for the letter “Y”) to delete all files saved.
The shift and
keys will have to be pressed again
to confirm erasure of all
files
.
Deleting a file removes it permanently!
Installation of the Battery
The CI-340 is dependent upon a properly charged power source for efficient and reliable
measurements and calculations. The included battery/battery eliminator is designed to provide the
necessary power. The system is designed to operate from 7.2V rechargeable Li-Ion batteries. Check
with the nearest representative or manufacturer if the included system does not include one or more of
the above items.
If the rechargeable battery should ever fail to charge properly, please recycle it. Many waste processing
systems do not allow Li-Ion batteries to be simply thrown in the trash. Refer to the
RECHARGING
chapter for further information on how to take care of the battery and for how to power the CI-340 in
the lab without using the Li-ion battery.
Proper installation of the battery is as follows:
Align the contacts of the battery with the contacts of the CI-340 (Figure 4).
Line up the battery so that it is about 7 mm “off” its final position within the battery mounts
in the direction shown in Figure 4.
Press the battery toward the contacts and slide in the direction shown (Figure 4) until
firmly in place. By pressing the battery toward the contacts, the CI-340 will make necessary
connections with the battery and the battery will be in the correct position.
To remove the battery, slide it in the opposite direction that is shown in Figure 4.
Note: The CI-340 should only be used in low RF ambient areas. Do not use near radio/TV
transmitting antennas or near electrical arc welders.
Содержание CI-340
Страница 3: ......
