22
23
EN
EN
Z22020-01
Z22020-01
2. Installing your appliance
2.1 Warnings
The flexible cable supplied with your appliance is desig-
ned to be connected to the mains via a junction box that must
be placed behind the appliance, with no need for a plug.
In a kitchen or bathroom, the junction box must be
positioned at least 25 cm from the floor.
The appliance must be installed as described in this
document and in accordance with the applicable European
and French standards, including CEI 60364.7.701 and NF
C15-100, as well as the rules of good professional practice.
For other countries (apart from France), the appliance
must be installed in accordance with standards in force and
with rules of good professional practice in the country of use.
IMPORTANT
The example shown only concerns a
bathtub. For other bathroom fixtures, please consult
your installer.
IMPORTANT
The system must be fitted with an omni-
polar circuit-breaker with a minimum contact opening of
3mm.
To ensure your system is safe:
- ensure that an area of at least 50 cm in front of the
appliance is clear of objects which might hinder air
circulation (furniture, chairs, etc.);
- position a shelf at least 10 cm above the top of your
radiator;
- use mounting screws suitable for your wall.
IMPORTANT
This appliance should never be installed
with the electrical connection box positioned topside.
Ensure that the bottom of the device is positioned at
least 15 cm above the floor.
NOTE
Electric towel radiators are designed to be
covered safely. However, to ensure that your ap-
pliance works efficiently, you are advised not to cover it
completely. Doing so will increase the temperature and
cause the internal cutout to turn off the appliance.
CAUTION
Always turn off the electricity supply (circuit-
b pilot wire) before making any connections.
15 cm mini