The following applies for all sub-functions:
Sub-functions are displayed for 10 seconds, then the main function
appears again. To premature quit the sub-function, press short the
UL- or LL-button.
5. 1 Upper display indications
Main functions are chosen with UR-button, sub-functions with UL-
button. To better distinguish
main functions
from sub-functions,
main functions are printed in a bold script and
sub-functions
are
printed in a bold, cursive script.
Speed
(only in Bike mode and Ski mode)
Indicates the current speed in km/h
(or mph = miles per hour).
Following applies only in Ski mode: Calculates
the speed out of the current decreasing (dis-
played speed can vary up to ±10% ; the more steeply or levelly the
slope, the more can the value vary).
Range: 0 - 199,9 km/h or 124,2 mph
Average speed
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the average speed
(of the bike adjusted).
Range: 0 - 199,9 km/h or 124,2 mph
Total average speed (bike 1 and bike 2)
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the calculated average speed of bike
1 and bike 2.
Range: 0 - 199,9 km/h or 124,2 mph
Maximum speed
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the maximum speed reached with the
adjusted bike.
Range: 0 - 199,9 km/h or 124,2 mph
Maximum speed bike 1 or bike 2
(only in Bike mode and Ski mode)
Sub-function of function ‚Speed‘.
Indicates the absolute maximum speed
reached and also the bike with which it was
achieved.
Range: 0 - 199,9 km/h or 124,2 mph
Current heart rate
Setting range: 30 to 240 bpm
(beats per minute; if value is over 200, the last
digit is displayed on the comma digit of the
upper display)
Indicates the current heart rate.
Note:
Heart rate functions can only be indicated with the
HAC
, if the accompanying transmitter belt is worn.
The heart rate functions have an energy-saving mode: if no signal is
received within a period of approx. 5 minutes, the heart rate receiver
of the
HAC
switches off automatically (symbol ‚heart‘ in the
display disappears). To reactivate the heart rate receiver , choose
again the function ‚Current heart rate‘ in the display.
Average heart rate
Sub-function of function ‚Current heart rate‘
Indicates the average heart rate.
Range: 30 to 240 bpm
Maximum heart rate
Sub-function of function ‚Current heart rate‘
Indicates the maximum heart rate.
Range: 30 to 240 bpm
Recuperating heart rate
Sub-function of function ‚Current heart rate‘
Indicates the recuperating heart rate (see
chap. 6.3).
Recuperating heart rate is the heart rate
measured 3 minutes after the recuperating
heart rate function is started (press UL- and
LL-button short and simultaneous). After 3 minutes a short signal
tones, when the measuring ends. The display indicates the heart
rate measured at start of this function and below the recuperating
heart rate (measured after 3 minutes).
Range: 30 to 240 bpm
Current ascent / descent
(only in bike mode)
Indicates the current ascent or descent ridden
at the moment (in %). The arrow on the right
side of the display indicates if an ascent or a
descent is measured.
Range: 0% to 99%
Note:
Technically restricted the correct value is indicated a few
seconds after the beginning of the ascent/descent.
After stopping (speed = 0) the last value remains in the display.
Average ascent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent‘
Indicates the average ascent of the current tour.
Range: 0% to 99%
Average descent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent‘
Indicates the average descent of the current
tour.
Range: 0% to 99%
Maximum ascent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent‘
Indicates the maximum ascent of the current
tour.
Range: 0% to 99%
Maximum descent
(only in bike mode)
Sub-function of function ‚Current ascent/des-
cent‘
Indicates the maximum descent of the current
tour.
Range: 0% to 99
Current gain or loss in altitude
(Variometer function)
Indicates the current gain or loss in altitude in
meters/ft x10 per minute. The arrow on the
right side of the display shows if it is an ascent
or a descent.
Range: 0 to 199 m/min resp. 0 to 65 ft x10/min
Note:
Technically restricted the correct value is indicated a few
seconds after choosing this function.
