CIAT 1-PH HEE BOX, Руководство по управлению

Страница: 23 / 28

7 - MONITORING
The controller may be connected to a local or remote monitoring PC or to most types of CMS (Modbus). For the listed functions
to be used, optional cards (Rs485, pCO Web) or gateways (devices able to interpret various communication protocols) must be
installed.
NOTE :
If using a communication bus, the routing and processing of the available data are outside CIAT's scope of supply. They must be
provided by the installer, and require the involvement of an integrator.
7.1 CMS
Various communication standards can be used to connect with a CMS monitoring system.
Expansion boards are inserted in the "Serial Card" port on the controller.
ModBus® RTU : insert the RS485 expansion board (CIAT code: 7119749 ) and connect it as described in the manual. Validating
the protocol on the user terminal (screen g1 ):
- Protocol MODBUS RTU
- Speed ---- bds (Set in accordance with the CMS speed)
-
Address
001 (Different to 0)
ModBus® TCP : insert the pCo Web card (CIAT code: 7119753 ) and connect it as described in the manual. Validating the protocol
on the user terminal (screen g1 ):
- Protocol MODBUS TCP
-
Speed
19,200 bds (Mandatory)
- Address 001 (Mandatory)
Bacnet® IP: insert the pCo Web card (CIAT code: 7119753 ) and connect it as described in the manual. Validating the protocol on
the user terminal (screen g1 ):
-
Protocol
BACNET IP
- Speed 19,200 bds (Mandatory)
- Address 001 (Mandatory)
7.2 The datapoint database
The unit comes with a communication database that includes the most important datapoints for the program, from the values of
the sensors to the parameters displayed in the masks. The database contains three types of datapoint: digital datapoints, integer
datapoints and analogue datapoints. The tables below list the names of these datapoints, their addresses and types (read-only
(R) or read/write (R/W)).
7.3 Modbus
7.3.1 ModBus RTU connection diagram
EN-23 1-PH HEE BOX