Chziri ZJR1 Series, Руководство пользователя

Страница: 9 / 18

Chapter 2 Installation and Wiring
2.4 Selection List of Peripheral Appliances
Option list of the motor soft starter peripheral breakers, electromagnetic
contactors
and cables, shown as below:
Soft Starter Models
Motor Rated
Current (A)
Motor
Power(KW)
Breaker
Specifications
(A)
Electromagnetic
contactor
Specifications (A)
Cable
Sizes
2
(mm
)
Options in the above table are for reference only.
Chapter 3 Operation Panel
3.1 Description of Operation Panel
1) Outline Drawing of Operation Panel
Functional Code Data Code
Unit Indicator
Ready Run Failure
Add/Substract
Key
Start Key
Stop Key
Programming Key
Confirm Key
Operation Panel Key Set Description
Symbols
Key Set Name
Functional Description
Run Key
Stop Key
Programming
Key
Confirm Key
Add Key
Substract Key
When "REAdy" is displayed, press this key to begin starting the
machine, and the starting state "
XXXX " will be displayed.
1) When the machine is in normal operation, press this key to stop and
"_XXXX" will be displayed once the machine stops completely.
2) This key also performs the function of failure state resetting.
When "REAdy" is displayed, press this key to set the manual. When
"P0030" is displayed, repress this key. When ":" flashes, press
to modify parameters.
1) After parameters are modified in programming, press this key to save. If
there is the indication of "good" with 2 sounds, this indicates the data has been
saved. Repress this key or press the stop key to exit.
2) Press this key when the machine is in operation, the voltage of input power
supply will be displayed.
3) When the power is on, press this key and the parameters you've set will be
restored to the factory default value
1) When entering into manual setting, press this key to modify parameters.
(When the colon does not flicker, this key is used to modify the functional code;
when the colon flickers, this key is used to modify the data value.)
2) When the machine is in operation, press this key to keep an eye on the
display of current (A), power (P) and overload heat balance (H).
When the last decimal behind the three-figure data > 999 is lightened, then "0"shall
be added behind the mantissa.
The tone beeps while pressing any of these keys. Otherwise, this action is invalid.