Chungho CHP-5350DL, Руководство пользователя

Страница: 11 / 32

09
Installation method
1
2
3
6
8
9
4
5
7
Connect tube to brine on the rear of the product. And then, connect tube to
drain hole such as sink, toilet etc..
Turn on water supply valve connected to the house and position the adapter
(source water valve) "OPEN".
Do not plug in the power for 30 minutes in order to stabilize the cooling system
and safe use of unit.
Check if water is supplied into the unit properly and any leakages on every
connection.
After 1 hour has passed from supplying the power, check if water is coming
out by pressing the water dispensing button.
Empty the water in the tank when "WATER FULL" lights on.
30 Minutes
Install horizontally.
Shut off water supply valve and separate the connector part of tap water in
order to connect an adapter(source water valve). Then, connect the adapter.
*
If a sealing rubber(packing) is missing or the thread of a screw is damaged, it may occur
water leakage.
*
The unit is recommended to install on the sink or table above 80 cm from the floor.
Connect the adapter(source water valve) and a water inlet on the rear of the
unit with a tube.
휘카페 4_영문매뉴얼_*이과수공기청정기-수정 16. 2. 22. 오후 2:47 페이지 11