Procedure Step 3:
Physically cut the 12 V power
These actions initiate
the disabling of 12 V
and HV Power
.
The 12V positive supply
cable is marked with a
First Responders Label
designating the cut
locations. Make a cut at
each side of the label
and remove the
segment.
Second:
Cut and remove a segment
of the 12V positive supply
cable. Isolate the cut ends
from chassis contact
.
First Responders Label
as seen in vehicle
First:
Under the hood in the
front, remove PDC cover
to reveal the positive 12 V
connection .
2017 Pacifica Hybrid Emergency Response Guide P.11
Emergency Disabling of Low and High Voltage Power
©2017 FCA US LLC
