Chrysler ASPEN Скачать руководство пользователя страница 380 | Manualshive

Страница: 380 / 481

Chrysler ASPEN Скачать руководство пользователя страница 380

If the indicator is dark or shows a green dot, proceed as
follows:

1. Wear eye protection and remove all metal jewelry such
as watch bands or bracelets which might make an
unintended electrical contact.

2. Park the booster vehicle within cable reach but with-
out letting the vehicles touch. Set the parking brake, place
the automatic transmission in PARK and turn the ignition
OFF on both vehicles.

3. Turn OFF the heater, radio and all unnecessary elec-
trical loads.

4. Connect one end of a jumper cable to the positive
terminal of the booster battery. Connect the other end of
the same cable to the positive terminal of the discharged
battery.

WARNING!

Do not permit vehicles to touch each other as this
could establish a ground connection and personal
injury could result.

5. Connect the other cable, first to the negative terminal
of the booster battery and then to the engine of the
vehicle with the discharged battery. Make sure you have
a good contact on the engine.

WARNING!

Do not connect the cable to the negative post of the
discharge battery. The resulting electrical spark could
cause the battery to explode.

(Continued)

378

WHAT TO DO IN EMERGENCIES

«
...
378
379
380
381
382
...
»

Содержание ASPEN


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов