Chrysler ASPEN Скачать руководство пользователя страница 305 | Manualshive

Страница: 305 / 481

Chrysler ASPEN Скачать руководство пользователя страница 305

Electronic Stability Program (ESP)

This system enhances directional control and stability of
the vehicle under various driving conditions. ESP cor-
rects for over/under steering of the vehicle by applying
the brake of the appropriate wheel to assist in counter-
acting the over/under steer condition. Engine power
may also be reduced to help the vehicle maintain the
desired path.

ESP uses sensors in the vehicle to determine the vehicle
path intended by the driver and compares it to the actual
path of the vehicle. When the actual path does not match
the intended path, ESP applies the brake of the appropri-
ate wheel to assist in counteracting the oversteer or
understeer condition.

•

Oversteer - when the vehicle is turning more than
appropriate for the steering wheel position.

•

Understeer - when the vehicle is turning less than
appropriate for the steering wheel position.

ESP/TCS Indicator Light

The ESP/TCS Indicator Light starts to flash as
soon as the tires lose traction and the TCS or
ESP system becomes active. It will also flash
once a swaying trailer is detected and the

Trailer Sway Control (TSC) system activates. If the ESP/
TCS Indicator Light begins to flash during acceleration,
ease up on the accelerator and apply as little throttle as
possible. Be sure to adapt your speed and driving to the
prevailing road conditions.

WARNING!

•

ESP cannot prevent the natural laws of physics
from acting on the vehicle, nor can it increase the
traction afforded.

(Continued)

STARTING AND OPERATING

303

5

«
...
303
304
305
306
307
...
»

Содержание ASPEN


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов