Chrysler ASPEN Скачать руководство пользователя страница 284 | Manualshive

Страница: 284 / 481

Chrysler ASPEN Скачать руководство пользователя страница 284

•

vehicle speed is above approximately 30 mph (48
km/h);

•

the TOW/HAUL switch has not been activated;

•

transmission

has

reached

normal

operating

temperature.

NOTE:

If the vehicle is started in extremely cold tem-

peratures, the transmission may not shift into OVER-
DRIVE and will automatically select the most desirable
gear for operation at this temperature. Normal operation
will resume when the transmission fluid temperature has
risen to a suitable level. Refer also to the Note under
torque converter clutch, later in this section.

If the transmission temperature gets extremely hot, the
transmission will automatically select the most desirable
gear for operation at this temperature. If the transmission
temperature becomes hot enough, the “Transmission
Temperature Indicator Light” may illuminate and the

transmission may downshift out of OVERDRIVE until
the transmission cools down. After cooldown, the trans-
mission will resume normal operation.

The transmission will downshift from OVERDRIVE to
DRIVE if the accelerator pedal is fully depressed at
vehicle speeds above approximately 35 mph (56 km/h).

When To Use TOW/HAUL Mode
When driving in hilly areas, towing a trailer, carrying a
heavy load, etc., and frequent transmission shifting oc-
curs, press the TOW/HAUL button. This will improve
performance and reduce the potential for transmission
overheating or failure due to excessive shifting. When
operating in TOW/HAUL mode, 5th gear (if equipped) is
disabled and 2-3 and 3-4 shift patterns are modified.
Shifts into OVERDRIVE (4th gear) are allowed during
steady cruise (for improved fuel economy) and automatic
closed-throttle downshifts to 3rd gear (for improved
braking) will occur during steady braking.

282

STARTING AND OPERATING

«
...
282
283
284
285
286
...
»

Содержание ASPEN


































































































































































































































































































































































































































































































Отзывы:

Нет отзывов