Chrysler 300 SRT 2019, Руководство пользователя

Страница: 40 / 592

CAUTION!
To avoid damage to the mirror during clean-
ing, never spray any cleaning solution di-
rectly onto the mirror. Apply the solution onto
a clean cloth and wipe the mirror clean.
Outside Mirrors
To receive maximum benefit, adjust the outside
mirror(s) to center on the adjacent lane of traffic
and a slight overlap of the view obtained from
the inside mirror.
NOTE:
The passenger side convex outside mirror will
give a much wider view to the rear, and espe-
cially of the lane next to your vehicle.
WARNING!
Vehicles and other objects seen in an outside
convex mirror will look smaller and farther
away than they really are. Relying too much
on side convex mirrors could cause you to
collide with another vehicle or other object.
Use your inside mirror when judging the size
or distance of a vehicle seen in a side convex
mirror.
Driver’s Outside Automatic Dimming
Mirror — If Equipped
The driver’s outside mirror will automatically
adjust for glare from vehicles behind you. This
feature is controlled by the inside automatic
dimming mirror and will automatically adjust for
headlight glare when the inside mirror adjusts.
Outside Mirrors With Turn Signal
And Approach Lighting — If
Equipped
Driver and passenger outside mirrors with turn
signal and approach lighting contain four LEDs,
which are located in the upper outer corner of
each mirror.
Three of the LEDs are turn signal indicators,
which flash with the corresponding turn signal
lights in the front and rear of the vehicle. Turning
on the Hazard Warning flashers will also acti-
vate these LEDs.
The fourth LED supplies illuminated entry light-
ing, which turns on in both mirrors when you use
the remote keyless entry key fob or open any
door. This LED shines outward to illuminate the
front and rear door handles. It also shines
downward to illuminate the area in front of the
doors.
The illuminated entry lighting fades to off after
about 30 seconds or it will fade to off immedi-
ately once the ignition is placed into the ON/
RUN position.
NOTE:
The approach lighting will not function when the
gear selector is moved out of the PARK position.
Power Mirrors
The power mirror controls are located on the
driver’s door trim panel.
The power mirror controls consist of mirror
select buttons and a four-way mirror control
switch. To adjust a mirror, push either the L (left)
or R (right) button to select the mirror that you
want to adjust.
NOTE:
A light in the select button will illuminate indicat-
ing the mirror is activated and can be adjusted.
Using the mirror control switch, push on any of
the four arrows for the direction that you want
the mirror to move.
Power mirror preselected positions can be con-
trolled by the optional Memory Seat Feature.
Power Mirror Control
39