Chrysler 300 SRT 2019, Руководство пользователя

Страница: 19 / 592

To Unlock The Doors
Push and release the unlock button on the key
fob once to unlock the driver’s door or twice
within five seconds to unlock all doors.
The turn signal lights will flash to acknowledge
the unlock signal. The illuminated entry system
will also be activated.
NOTE:
All door unlock settings can be programmed
to your convenience through Uconnect Set-
tings. Refer to “Uconnect Settings” in “Mul-
timedia” for further information.
•
Unlock the driver door on the first push of the
key fob unlock button.
•
Unlock all doors on the first push of the key
fob unlock button.
NOTE:
To unlock doors and trunk with passive entry,
refer to “Keyless Enter-N-Go — Passive Entry”
located in “Doors” in “Getting To Know Your
Vehicle” for further information.
NOTE:
When you use the key fob to open any door, the
courtesy lights, overhead lights, and approach
lighting in the outside mirrors (if equipped) will
turn on. Refer to “Interior Lights” in “Getting To
Know Your Vehicle” for further information.
1st Press Of Key Fob Unlocks
This feature lets you program the system to
unlock either the driver’s door or all doors on the
first push of the unlock button on the key fob.
To change the current setting, refer to “Uconnect
Settings” in “Multimedia” for further information.
Flash Lights With Lock
This feature will cause the turn signal lights to
flash when the doors are locked with the key
fob. This feature can be turned on or turned off.
To change the current setting, refer to “Uconnect
Settings” in “Multimedia” for further information.
Headlight Illumination On Approach
This feature activates the headlights for up to
90 seconds when the doors are unlocked with
the key fob. The time for this feature is program-
mable, on vehicles equipped, through Uconnect
Settings. To change the current setting, refer to
“Uconnect Settings” in “Multimedia” for further
information.
To Unlatch The Trunk
Push the trunk button on the key fob two times
within five seconds to unlatch the trunk.
If the vehicle is equipped with Passive Entry,
refer to “Keyless Enter-N-Go — Passive Entry”
under “Getting To Know Your Vehicle” for further
information.
To Lock The Doors And Trunk
Push and release the lock button on the key fob
to lock all doors.
The turn signal lights will flash and the horn will
chirp to acknowledge the signal if programmed.
Refer to “Uconnect Settings” in “Multimedia” for
further programmable information.
NOTE:
To lock the doors with passive entry, Refer to
“Keyless Enter-N-Go — Passive Entry” located
in “Doors” in “Getting To Know Your Vehicle” for
further information.
If one or more doors are open, or the trunk is
open, the doors will lock. The doors will unlock
automatically if the key fob is left inside the
passenger compartment, otherwise the doors
will stay locked.
Sound Horn With Lock
This feature will cause the horn to chirp when
the doors are locked with the key fob. This
feature can be turned on or turned off. To
change the current setting, refer to “Uconnect
Settings” in “Multimedia” for further information.
Key Fob Battery Replacement
The recommended replacement battery is one
CR2032 battery.
NOTE:
•
Perchlorate Material — special handling may
apply.
•
Do not touch the battery terminals that are on
the back housing or the printed circuit board.
18