Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 437

Страница: 437 / 491

•

Taxi, police, or delivery service (commercial ser-
vice).†

•

Off-road or desert operation.

•

If equipped for and operating with E-85 (ethanol)
fuel.

NOTE:

If ANY of these apply to you then change your

engine oil every 3,000 miles (5 000 km) or 3 months,
whichever comes first, and follow schedule “B—All
Engines” of the

Maintenance Schedules

section of this

manual.

NOTE:

IF ANY of these apply to you then flush and

replace the engine coolant every 102,000 miles (170 000
km) or 60 months, whichever comes first, and follow
schedule “B—All Engines” of the

Maintenance Sched-

ules

section of this manual.

NOTE:

Most vehicles are operated under the conditions

listed for Schedule

—ALL ENGINES.

Second is Schedule “A”—NON TURBO. It is for vehicles
that are not operated under any of the conditions listed
under Schedule

—ALL ENGINES.

Third is Schedule “A”—TURBO. It is for vehicles that are
not operated under any of the conditions listed under
Schedule

—ALL ENGINES.

Use the schedule that best describes your driving condi-
tions. Where time and mileage are listed, follow the
interval that occurs first.

CAUTION!

Failure to perform the required maintenance items
may result in damage to the vehicle.

MAINTENANCE SCHEDULES

435

T
E

N
A
N
C

S
C
H
E
D
U
L
E
S

Содержание 2008 PT Cruiser












































































































































































































































































































































































































































































































Результаты поиска

Содержание 2008 PT Cruiser

Отзывы:

Chrysler 2008 PT Cruiser, Руководство пользователя, Страница: 437 / 491

Результаты поиска

Содержание 2008 PT Cruiser

Отзывы: