Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 491

Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 113

•

If the belt still can’t be tightened, or if by pulling and
pushing on the restraint loosens the belt, disconnect
the latch plate from the buckle, turn the latch plate
around, and insert the latch plate into the buckle
again. If you still can’t make the child restraint secure,
try a different seating position.

•

Buckle the child into the seat according to the child
restraint manufacturer’s directions.

•

When your child restraint is not in use, secure it in the
vehicle with the seat belt or remove it from the vehicle.
Don’t leave it loose in the vehicle. In a sudden stop or
collision, it could strike the occupants or seat backs
and cause serious personal injury.

Lower Anchors and Tether for CHildren (LATCH)
Your vehicle is equipped with the child restraint anchor-
age system called LATCH, which stands for Lower
Anchors and Tether for CHildren. The LATCH system
provides for the installation of the child restraint without

using the vehicle seat belt. Both rear seating positions
have exclusive lower anchorages located at the rear of the
seat cushion. They are round bars, part of the seat and
body structure, and are readily visible. In addition, there
are two tether strap anchorages located behind the rear
seat head form, in the convertible top storage area.

Latch Anchors

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

111

2

«
...
111
112
113
114
115
...
»

Содержание 2008 PT Cruiser












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов