Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 491

Chrysler 2008 PT Cruiser Скачать руководство пользователя страница 111

•

The belt-positioning booster seat is for children weigh-
ing more than 40 lbs (18 kg), but who are still too small
to fit the vehicle’s seat belts properly. If the child
cannot sit with knees bent over the vehicle’s cushion
while the child’s back is against the seat back; they
should use a Belt Positioning Booster Seat. The child
and booster seat are held in the vehicle by the lap/
shoulder belt. (Some booster seats are equipped with a
front shield and are held in the vehicle by the lap
portion.)

NOTE:

For

additional

information

refer

to

www.nhtsa.gov or www.seatcheck.org.

WARNING!

•

Improper installation can lead to failure of an
infant or child restraint. It could come loose in a
collision. The child could be badly injured or
killed. Follow the manufacturer’s directions ex-
actly when installing an infant or child restraint.

•

A rearward facing child restraint should only be
used in a rear seat. A rearward facing child re-
straint in the front seat may be struck by a deploy-
ing passenger airbag which may cause severe or
fatal injury to the infant.

Here are some tips on getting the most out of your child
restraint:

•

Before buying any restraint system, make sure that it
has a label certifying that it meets all applicable Safety

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

109

2

«
...
109
110
111
112
113
...
»

Содержание 2008 PT Cruiser












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов