Chrysler 2005 Pacifica Touring Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 376

Chrysler 2005 Pacifica Touring Скачать руководство пользователя страница 45

If a child from 1 to 12 years old must ride in the front
passenger seat because the vehicle is crowded, move the
seat as far back as possible, and use the proper child
restraint. Refer to the section on Child Restraint.

You should read the instructions provided with your
child restraint to make sure that you are using it properly.

2.

All occupants should wear their lap and shoulder

belts properly.

3.

The driver and front passenger seats should be

moved back as far as practical to allow the front airbags
room to inflate.

4.

If your vehicle has left and right side curtain airbags,

do not lean against the door, airbags will inflate force-
fully into the space between you and the door.

WARNING!

•

Relying on the airbags alone could lead to more
severe injuries in a collision. The airbags work
with your seat belt to restrain you properly. In
some collisions the airbags won’t deploy at all.
Always wear your seat belts even though you
have airbags.

•

Being too close to the steering wheel or instru-
ment panel during front airbag deployment could
cause serious injury. Airbags need room to inflate.
Sit back, comfortably extending your arms to
reach the steering wheel or instrument panel.

•

If the vehicle has left and right side curtain
airbags, they also need room to inflate. Do not
lean against the door or window. Sit upright in the
center of the seat.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

45

2

«
...
43
44
45
46
47
...
»

Содержание 2005 Pacifica Touring

























































































































































































































































































































































































Отзывы:

Нет отзывов