Chrysler 2005 Pacifica Touring Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 376

Chrysler 2005 Pacifica Touring Скачать руководство пользователя страница 40

The Enhanced Warning System (BeltAlert) can be en-
abled or disabled by your authorized dealer or by
following these steps:

NOTE:

The following steps must occur within the first

60 seconds of the ignition switch being turned to the ON
or RUN position. DaimlerChrysler does not recommend
deactivating the Enhanced Warning System (BeltAlert).

1. Turn the ignition switch to the OFF position and
buckle the driver’s seat belt.

2. Turn the ignition key to the RUN position (engine
does not need to be running), and wait for the Seat Belt
Warning Light to turn off.

3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driver’s seat belt at least three
times within 10 seconds, ending with the seat belt
buckled.

NOTE:

Watch for the Seat Belt Warning Light to turn on

while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.

4. Turn off the engine. A single chime will sound to
signify that you have successfully completed the pro-
gramming.

The Enhanced Warning System (BeltAlert) can be reacti-
vated by repeating this procedure.

NOTE:

Although the Enhanced Warning System (BeltA-

lert) has been deactivated, the Seat Belt Warning Light
will continue to illuminate while the driver’s seat belt
remains unbuckled.

40

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
38
39
40
41
42
...
»

Содержание 2005 Pacifica Touring

























































































































































































































































































































































































Отзывы:

Нет отзывов